Chromatography Spare Parts

SGE™ GC Inlet Liners

For use with GC instruments X5 GC inlet liner SGEsplit/splitless with recessed

Whatman™ HEPA-Vent Filter

Strengthened glass filter media by dual lamination with a tough polyester monofilament. Whatman™ HEPA-Vent Filters are ideal for air and gas filtration applications where high retention, dirt-holding capacity and flow rates are required. X10 HEPA-VENT GMF 50MM

Thermo Scientific™ Click-On™ Inline Gas Filter Connectors

Use these quality end fittings o-rings, and other connectors for your Thermo Scientific™ Click-On™ Inline Filters.

X2 GC INLINE FILTER CLICK-ONend fitting brass 0.25 inch max pressure 11 bar

Thermo Scientific™ Click-On™ Inline Gas Filters

Eliminate contamination from your gas source for optimal GC performance with the easy-to-use Thermo Scientific™ Click-On™ Inline Gas Filters.

GAS FILTER CLICK-ON(TM) TRIPLEoxygen, moisture and HCs HC, H2O,O2

EMD Millipore™ Millex™ Filters: Inlet and Outlet for Silicone Tubing

Protect vacuum sources from contamination and moisture damage X100 Millex-FG 50mm PTFE .2um Non-sterile HB-HB

Whatman™ Carbon-Cap Disposable Activated Carbon Capsules

Filled with high-purity, high-efficiency, acid-washed, granular-activated carbon. Whatman™ Carbon Cap Disposable Activated Carbon Capsules are suitable for adsorption of organics from air and removal of color, organics and chlorine from water. CARBON CAP 75 ACTIV. CARBON/HEPA

Thermo Scientific™ Ferrules for Agilent™ Instruments

Ensure reliable connections for Agilent™ GC instruments with these Thermo Scientific™ Ferrules for Agilent Instruments. X10 Ferrule Thermo Scientific for injectors and

Thermo Scientific™ SLIPFREE™ HPLC Column Double Connectors

Ensure leak-free, void-free column connections and optimize LC performance with self-adjusting Thermo Scientific™ SLIPFREE™ HPLC Column Double Connectors. SLIPFREE DOUBLE FLEXIBLE CONNECTORZoll Innen-Dm.

GE Healthcare™ AC 10 Flow Adapter

Help keep bed height of column constant and protect from insoluble particles FLOW ADAPTER AC 10 FOR USE WITH C COLUMNS, (ECONOMical modular columns for low pressure or gravity

GE Healthcare™ FEP Tubing Kit

TUBING KIT 10X1.5M, PTFE ID1.6MM OD1/8, 1/Cs28-9809-84

Macherey Nagel™ Manual Crimper

Verschliesszange N 13

Thermo Scientific™ Reacti-Block™ Aluminum Blocks

Configure the Thermo Scientific™ Reacti-Therm™ Module with interchangeable aluminum blocks with a variety of hole configurations for vials and tubes.

BLOCK REACTI-BLOCK V-1 17 HOLESaluminium holds microfuge testtubes 11mm I.D. x

Thermo Scientific™ SilTite™ Ferrule Kits

Eliminate leaks with Thermo Scientific™ SilTite Ferrule Kits. X10 FERRULES SILTITE KITS 0.53 MM

Thermo Scientific™ PEEK Capillary Tubing

Use these sample loops for your Thermo Scientific™ Rheodyne™ HPLC sample injectors.  PEEK CAPIL TUB 1/16 X 0.005 100CM

Thermo Scientific™ SWAP-IT™ GC-MS Interface System

Make column changeovers quick and easy. Use this GC-MS interface system to switch capillary columns without the need to vent your mass spectrometer (MS).

SWAP-IT GCMS INTERFACE AGILENT

Thermo Scientific™ 316 Stainless Steel Capillary Tubing for HPLC

Use cleaned, polished, passivated and ready-to-use Thermo Scientific™ 316 Stainless Steel Capillary Tubing for HPLC. SLIPFREE SING.FLEX CONNECTOR 28CM

Thermo Scientific™ PEEK Fingertight Fittings

Ensure HPLC quality and robustness with Thermo Scientific™ PEEK Fingertight Fittings. X10 Fitting Thermo Scientific LC tubing fingertigh

Thermo Scientific™ 316 Stainless Steel Capillary Tubing for HPLC in 5-Foot Coils

Use cleaned, polished and passivated Thermo Scientific™ 316 Stainless Steel Capillary Tubing for HPLC, ready for immediate use. 316SS CAPILLARY TUBING0.010''ID X 5' COIL

Kimble™ Kontes™ Chromatography Column ETFE Nut for 1/16 in. Tubing

Tubing nuts and ferrules are used to make connections between the tubing and the end fittings of CHROMAFLEX™, FLEX-COLUMN™ and DISPOSAFLEX™ columns. CTFE NUT 1/4'28F FOR 1/16'OD

Thermo Scientific™ Reacti-Therm™ Magnetic Stirrers for Reacti-Vial™ Small Reaction Vials

Use these triangular stir bars for faster reaction times and smooth mixing in vials of the Thermo Scientific™ Reacti-Therm™ Derivatization System.

X6 Magnetic stirrer Thermo Scientific Reacti-vial

Thermo Scientific™ Super Clean™ Gas Cartridge Filters

Improve gas quality and optimize GC analysis with easy-to-use Thermo Scientific™ Super Clean™ Gas Cartridge Filters.

GAS FILTER SUPER CLEAN MOISTUREcartridgewith indicator for inert carrier, air,

Thermo Scientific™ Rheodyne™ Injection Port Needle Cleaner

Use the Thermo Scientific™ Rheodyne™ Injection Port Needle Cleaner to maintain performance of your Rheodyne Sample Injectors for HPLC. INJECTION PORT NEEDLE CLEANERRheodyne foruse with Rheodyne injectors

Thermo Scientific™ Reacti-Therm™ Heating and Stirring Modules

Perform derivatization and other small-scale reactions reliably and with ease.

HEATING MODULE REACTI-PROBEremotetemperature probe for Reacti-Therm modules

Thermo Scientific™ Pre-cut PEEK Tubing in a 5-foot Coil

Thermo Scientific™ Pre-cut PEEK Tubing in a 5-foot Coil is easily cut to the desired length. Tubing Thermo Scientific 5 foot coil PEEK HPLC

Thermo Scientific™ 15% Graphite/85% Vespel Ferrules for Thermo Scientific Instruments

Ensure reliable connections for Thermo Scientific™ GC instruments with these Thermo Scientific™ Ferrules. X10 Ferrule Thermo Scientific GC 15% graphite/85%

Thermo Scientific™ Stand-alone Guard Cartridge Holders

For use with HPLC columns with I.D. ranging from 1.0 to 4.0mm STAND-ALONE GUARD CARTRIDGE HOLDER

Thermo Scientific™ RheFlex™ High-Pressure Fittings

Ensure reliable high-pressure connections with Thermo Scientific™ RheFlex™ High-Pressure Fittings. FERRULE RHEFLEX HIGH PRESSURE316 stainless steel for model 81250.55mm

  spinner