Tubes

Falcon™ Round-Bottom Polystyrene Tubes

Constructed of optically clear polystyrene for easy viewing of sample. Corning™ Falcon™ Round-Bottom Polystyrene Tubes are widely used and referenced in laboratory protocols. X500 Round BottomTest Tube, PS, 14ml, Snap Cap, St

Fisherbrand™ Easy Reader™ Conical Polypropylene Centrifuge Tubes

Imprinted clear black graduations ensure accurate readings X500 Centrifuge Tube, PP, 15ml, plug seal, packedin sleeve

Falcon™ 50mL Conical Centrifuge Tubes

Tested to withstand centrifugation of 16,000 RCF in a fully supported rotor with room temperature water. Corning™ Falcon™ 50mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients. X500 FALCON POLYPROPYLENE CONICAL CENTRIFUGE

Eppendorf™ Eppendorf Tubes™ Conical Tubes

Use these tubes for the simple and safe processing of sample volumes up to 5.0mL. Eppendorf Tubes™ represent the perfect option for working with medium–sized sample volumes. Eppendorf Tubes, 5mL, Starter Pack, PCR clean,

Applied Biosystems™ MicroAmp™ Optical 8-Cap Strips

Tight seal minimizes evaporation and contamination X300 MICROAMP OPTICAL 8-CAP STRIP STORE AT ROOMtemperature

Axygen™ 8-Strip PCR Tubes, 0.2mL

Available in a variety of colors for easy sample identification. Axygen™ 8-Strip PCR Tubes, 0.2mL are constructed of sturdy polypropylene. Each non-sterile, conical tube features thin and consistent wall thickness. Sold with flat or domed caps to prevent sample loss or without caps. X125 0,2ML THINWALL TUBE 8/STRIP

Fisherbrand™ 0.2mL PCR Tubes

With integral “snap shut” cap X1000 Fisherbrand PCR tube 0.2ml, domed cap, PP, red - FB-0337/R

Fisherbrand™ Low-Retention Microcentrifuge Tubes

Provides a secure seal—even over extended periods. Critical applications where minute sample recovery is important. X250 MICROTUBE LOW BINDING 2ML

Thermo Scientific™ Nunc™ 15mL & 50mL Conical Sterile Polypropylene Centrifuge Tubes

These premium, high-quality conical tubes are environmentally friendly, and allow for increased traceability with the largest writing area on the market. X300 Centrifuge tube Thermo Scientific Nunc conicafitted HDPE cap, graduated, racked, RCF, large

Thermo Scientific™ Nalgene™ Oak Ridge High-Speed PPCO Centrifuge Tubes with Sealing Cap

Easily view the contents of contact-clear, Thermo Scientific™ Nalgene™ Oak Ridge High-Speed PPCO Centrifuge Tubes with Sealing Caps. Oak Ridge centrifuge tubes PPCO/PP/SI 16 ml

Applied Biosystems™ MicroAmp™ Fast 8-Tube Strip, 0.1mL

Maximized thermal conductivity reduces PCR amplification times X125 MICROAMP FAST 8-TUBE STRIP, 0.1ML STORE ATroom temperature

Applied Biosystems™ MicroAmp™ 8-Cap Strip

Designed to fit on MicroAmp reaction tubes, tube strips, and 96-well plates X8 MICROAMP 8-CAP STRIP, ASSORTED COLOURS STOREat room temperature

Eppendorf™ Snap-Cap Microcentrifuge Flex-Tube™ Tubes

Choose from six colors, including amber for light-sensitive samples X500 02550-07 EPPENDORF TUBES EW-02550-07 Eppendorf Microcentrifuge Tubes, capacity, 1.5-mL, 500/pac

Applied Biosystems™ MicroAmp™ Optical 8-Tube Strip, 0.2mL

Maximized thermal conductivity X1000 MICROAMP OPTICAL 8-TUBE STRIP, 0.2ML 1000TUBes Store at room temperature

Fisherbrand™ 0.2mL PCR Tube Strips

Ideal for use in 0.2mL, 96-well V-bottom thermal cyclers X250 Fisherbrand PCR 8-tubes 0.2ml strip w/flat cap, PP, blue - FB-1182/B

Fisherbrand™ Premium Microcentrifuge Tubes: 1.5mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling X500 Microtube Fisherbrand 1.5ml, PP, Red, graduated, w/snap-cap, non-sterile

Falcon™ Round-Bottom Polypropylene Tubes

Manufactured from polypropylene for excellent chemical and thermal resistance. Corning™ Falcon™Round-Bottom Polypropylene Tubes are tested to withstand 3000 x g centrifugation. X1000 Round Bottom Test Tube, PP, 5ml, No Cap, Ste

Corning™ Polypropylene Centrifuge Tubes

Manufactured from clear polypropylene for superior chemical resistance. Corning™ Polypropylene Centrifuge Tubes are an ideal solution for centrifuge needs. X500 Centrifuge tube PP sterile 15ml no cap max RCF 12000 25/bags

Fisherbrand™ Disposable Borosilicate Glass Tubes with Threaded End

Round bottom; with marking spot X500 Test tube, uncapped, 20X150MM

DWK Life Sciences Kimble™ KIMAX™ Conical-Bottom Glass Centrifuge Tubes: 200mL Capacity

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. X6 ASTM TUBE 200ML 6' 200%

Corning™ Polyetherimide Centrifuge Tube Cushions

Tube cushion provides necessary support during centrifugation preventing large capacity tubes from collapsing X6 support cushions PEI for centrifuge tube 250ml(430776)

Brand™ Sterile Polystyrene Cylindrical Test Tubes

Manufactured from transparent. BRAND™ Sterile Polystyrene Cylindrical Test Tubes have an RCF max of 3000. X2000 Sample tube, PS16 x 100mm, transparent

Axygen™ MaxyClear Capless Microcentrifuge Tubes

Achieve excellent visibility in crystal clear polypropylene. Axygen™ MaxyClear Capless Microcentrifuge Tubes feature frosted panels on the side for writing. Boilproof, autoclavable and can withstand up to 20,000RCF. Available in 1.5mL and 2.0mL graduated tubes. X500 1.5ML MICROTUBES NO C

Axygen™ MaxyClear Snaplock Microtubes, 1.5mL

Ensure an efficient seal that stays closed during centrifugation. Axygen™ MaxyClear Snaplock Microtubes, 1.5mL provide excellent visibility and feature a piercing port for syringe access. Available in a wide variety of colors. Maxymum Recovery™ and sterile options available. X500 1.5ML TUBE BOIL PROOF ASSORT

Invitrogen™ Thin-walled, Frosted Lid, RNase-free PCR Tubes, 0.2mL

Easy label cap 0.2 ML FROSTED LID PCR TUBES2 ml), 1000 tubes

Thermo Scientific™ 0.2 mL Individual Tubes

0.2 mL individual tubes with attached flat or dome snap shut caps, available in a variety of colors X1000 PCR TUBE 0,2ML FLAT ASSORTED(VE=1000Stck.)

Thermo Scientific™ 0.2 mL Strip Tubes

Optimize PCR and qPCR with these 0.2 mL strip tubes, available as 8 tubes per strip in several colors or 12 tubes per strip. X80 STRIP 12X0,2ML FLAT CAP

Fisherbrand™ Premium Microcentrifuge Tubes: 0.6mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling X500 Microtube Fisherbrand 0.6ml, PP, Yellow, graduated, w/snap-cap, non-sterile

Corning™ Mini Bioreactor Centrifuge Tube

Ideal for high throughput process optimization for suspension cell culture X300 Mini Bioreactor, 50ml Centrifuge Tube with Vent Cap, Sterile, 25/bag

Fisherbrand™ Black Polypropylene Screw Caps for Glass Specimen Vials

Screw securely into place to seal squat or tall form glass screw neck specimen vials. Fisherbrand™ Black Polypropylene Screw Caps for Glass Specimen Vials are foil lined and available in sizes to fit a variety of tall or squat form vials. X300 Screw cap,black,polypropylene,foil lined,OD 11.45mm,ID 10.0mm,For neck bore 5.5mm vials

  spinner