Heaters and Heating Mantles

Bibby Scientific™ Heating Element Mantle

REPLACEMENT ELEMENT FOR EM/EME

Fisherbrand™ Heating Mantle

Use these heating elements with built in controllers for a variety of applications. Fisherbrand™ Heating Mantles are metal cased with a unique airflow keeping the exterior cool to the touch. HEATING MANTLE 1L350 W

Electrothermal™ HT9 Series Glass Fibre Heating Tapes

Provides heat for columns, pipes, valves and transfer lines, especially when these applications need to be observed. Electrothermal&trade HT9 Series Glass Fibre Heating Tapes can be applied to metal pipes as well as glassware. HEATING TAPE (7.3m) WITH EARTH BRAID 1200W 230V

Thermo Scientific™ Gas Regulators for Reacti-Vap™ Evaporators

Use these gas regulators to deliver the right amount of gas for sample evaporation using the Thermo Scientific™ ReactiVap™ Evaporator.

GAS REGULATOR 1/4' TUBE

Electrothermal™ Replacement Digi-Mantle Heater Cartridge

Enables a round bottom flask to be stirred and heated up to an element temperature of 450°C. Electrothermal™ Replacement Digi-Mantle Heater Cartridge uses precise electronic control to provide accurate e of temperature and stirring measures. CARTRIDGE HEATING 300WW FLASKCAPACITY 1000ML MAX400C EMM1000

Fisherbrand™ Multi Extraction Mantles - 3 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains “cool-to-the-touch” SOXHLET AIR BATH FOR 3 X 250ML FLASKS 220-240V50-60HZ

Bibby Scientific™ Heating Electromantle

REPLACEMENT ELEMENT FOR EMV

Alfa Aesar™ Hydrogen Purifier Accessory, Heaters

For use with Hydrogen Purifier System Heater for Hydrogen Purifier HP-200, 1250W, 230V1each

R&L Enterprises™ Steel Wire Gauze

Provides excellent support to beakers and other glassware during heating on ring stands and tripods. R&L Enterprises™ Steel Wire Gauze is a flat square manufactured from steel mesh.
X10 Gauzes steel wire 125x125mm

Electrothermal™ CMUV Series Large Volume Controlled Mantle

Delivers the benefits of the CMU Electromantle, but for very large 60°C funnels, as well as pear-shaped and round bottom flasks. Electrothermal™ CMUV Series Large Volume Controlled Mantle accommodates funnels through bottom opening in the Electromantle base achieved through a “V-shaped” design for the heating mantle. Electro-heating mantle 10L capacity

Fisherbrand™ Multi Extraction Mantles - 6 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains “cool-to-the-touch” 6 Recess multi-mantle, heating only, max temp 450C, for 6 x 500ml flask, 230V 50/60Hz, 1200W

Electrothermal™ Micro-Kjeldahl MM Series Extraction Heater

Designed for Kjeldahl extraction on a micro scale to determine the protein content of food. Electrothermal™ Micro-Kjeldahl MM Series Extraction Heater has 6 recesses in a stainless steel outer casing with back-mounted brackets (supplied with each unit), which can hold support rods of 12.7mm diamter max. VÄRMEMANTEL MM2313/E MICRO KJELDAL 6 POS.

Thermo Scientific™ Reacti-Vap™ Evaporator Replacement Parts

Maintain and expand the life of your Thermo Scientific™ Reacti-Vap™ Evaporator module using these quality replacement parts.

X4 Rep screws for Reacti-Vap

Fisherbrand™ Multi Extraction Mantles - 3 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains “cool-to-the-touch” EXTRACTION EQUIPMENT 3X1000ML

Bibby Scientific™ MC227 1-Way Heating Controller

POWER CONTROLLER,CURRENT RATING 5A CONTINUOUS,10AINTERMITTENT,220-250V AC

Electrothermal™ CMU Series Uncontrolled Mantle

Double-fused and grounded for safety. Electrothermal™ CMU Series Uncontrolled Mantle requires a controller such as MC5 or MC242. VÄRMEMANTEL CMU3000/E ELECTROTHERMAL

Electrothermal™ EME Series 6-Position Extraction Mantle

Designed to heat multiple round bottom flasks simultaneously. Electrothermal™ EME Series 6-Position Extraction Mantle is often used for extraction, but may be used wherever heating of multiple flasks is required. The vented case's unique air flow ensures the outer case remains safe to touch. EXTRACTION EQUIPMENT 6X1000ML

Fisherbrand™ Silver Heating Mantle

Use these heating elements with built in controllers for a variety of applications. Fisherbrand™ Silver Heating Mantles are metal cased with a unique airflow keeping the exterior cool to the touch. HEATING MANTLE 20L 1700 W

Electrothermal™ CMUA Series Controlled Stirring Mantle

CMUA Electromantles share all the excellent features of the CMU Electromantle, but with the added functionality of magnetic stirring. For convenience and safety, the electric circuitry for stirring is built into the base of the heater, enabling powerful stirring over a wide range of solution volumes and viscosities using a magnetic stir bar. CMUA 1LTR 230V MANTLE/CONTROL

Bibby Scientific™ Electrothermal™ Replacement Spare Heater Element

ELEMENT,SPARE PART FOR EMEA3/6/0500 (EXP-400-030D& EXP-400-090Y) STIRRING SOXHLET HEAT' G MANTLE

Electrothermal™ EMX Series Spill-Proof Electromantle

Accommodates 60°C funnels, pear-shaped or round bottom flasks. Electrothermal™ EMX Series Spill-proof Electromantle is designed to accept a large range of flasks and funnel sizes for added flexibility. Stainless steel liner over the heating element providea additional electrical and mechanical protection against spills and ensures easier cleaning. ELECTRO-HEATING MANTLE 500ML to 1L FLASK V-SHAPED

Electrothermal™ EMV Series V-Shaped Electromantle

Accommodates 60°C funnels, pear-shaped or round bottom flasks. Electrothermal™ EMV Series V-Shaped Electromantle has been designed to accept a large range of flasks and funnel sizes for added flexibility.The stainless steel screen on all EMV models covers the heater element to protect against shock hazards due to spills or flask breakage. MULTIMANTLE 2000-5000ML

Electrothermal™ EMEA Series 3-Position Extraction Mantle With Stirring

Heats multiple round bottom flasks simultaneously with the added functionality of magnetic stirring. Electrothermal™ EMEA Series 3-Position Extraction Mantle With Stirring includes a vented case with unique air flow to ensure the outer case remains safe to touch. EXTRACTION EQUIPMENT STIRRED 3X1L

Cole-Parmer™ Cole-Parmer™ StableTemp™ Dual-Element Heating Tapes

Use these heating tapes for a wide range of thermal applications. Cole-Parmer™ StableTemp™ Dual-Element Heating Tapes offer greater flexibility than other high-temperature heating tapes and install directly to a wide variety of surfaces and geometries. HEATING TAPE 1/2' 4FT

Fisherbrand™ Multi Extraction Mantles: 6 Recess Model, Heating and Stirring

Vented case's unique airflow ensures the unit remains “cool-to-the-touch” EXTRACTION EQUIP. STIRRED 6X250ML250ml, 230V

Fisherbrand™ Multi Extraction Mantles - 3 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains “cool-to-the-touch” EXTRACTION EQUIPMENT 3X500ML

  spinner