Filter Holders and Hardware

Merck Filter Holder 90 mm, Stainless Steel

Merck Filter Holder 90 mm, Stainless Steel

Accessories for filter holders for sample preparation.

Merck Swinnex Filter Holders

Merck Swinnex Filter Holders

Accessories for filter holders for sample preparation.

DWK Life Sciences DURAN™ Filter Disc Sintered Glass, Porosity 5, edge not fused

DWK Life Sciences DURAN™ Filter Disc Sintered Glass, Porosity 5, edge not fused

A prerequisite for successful work with glass filters is the selection of the right porosity. It is important to select a filter whose largest pore size is slightly below the grain size of the smallest particles still to be separated.

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (47mm)

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (47mm)

Used for general filtration and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination

MilliporeSigma™ Ground Joint Flasks for Vaccum Filtration

MilliporeSigma™ Ground Joint Flasks for Vaccum Filtration

Accessories for filter holders for sample preparation.

Merck Millipore Replacement Parts for Swinnex™ Filter Holders

Merck Millipore Replacement Parts for Swinnex™ Filter Holders

Use to ultraclean or sterilize small volumes of liquids dispensed by syringe

Merck Filter Holder 142 mm, Stainless Steel

Merck Filter Holder 142 mm, Stainless Steel

Accessories for filter holders for sample preparation.

Merck All-Glass Filter Holder Kit, 90 mm

Merck All-Glass Filter Holder Kit, 90 mm

Vacuum filter aqueous, organic, or corrosive liquids for particulate contamination analysis.

Kontes™ Membrane Filtration Glassware from Restek

Kontes™ Membrane Filtration Glassware from Restek

Used for routine filtration of corrosive liquids and removal of particles from HPLC solvents

Merck Accessories for 47 mm All-glass Filter Holders Kits and MilliSolve Kit

Merck Accessories for 47 mm All-glass Filter Holders Kits and MilliSolve Kit

Designed to replace parts contained in glass vacuum filtration kits or provide for an alternative configuration

Merck Microsyringe Filter Holder, 25 mm

Merck Microsyringe Filter Holder, 25 mm

Accessories for filter holders for sample preparation.

Merck Millipore MultiScreen™<sub>HTS</sub> Vacuum Manifold

Merck Millipore MultiScreen™HTS Vacuum Manifold

For vacuum filtration using 96- and 384-well MultiScreenHTS, MultiScreen™ Solvinert, and Solvinert Deep Well filter plates

Cytiva Whatman™ Vacuum-Type Glass Membrane Holder

Cytiva Whatman™ Vacuum-Type Glass Membrane Holder

Produced from borosilicate glass and available with a choice of support screen. Whatman™ Vacuum-Type Glass Membrane Holder is suitable for aqueous and organic solvent filtration. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane.

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Solvent Filtration Solvent Pick-up Adapter

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Solvent Filtration Solvent Pick-up Adapter

Converts Ultra-Ware filtration assemblies for inline filtration/degassing applications

DWK Life Sciences Kimble™ Microfiltration Assembly Hardware

DWK Life Sciences Kimble™ Microfiltration Assembly Hardware

Use Kimble™ Microfiltration Assembly Hardware when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate.

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (90mm)

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (90mm)

Designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with PTFE-Faced Fritted Glass Support (47mm)

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with PTFE-Faced Fritted Glass Support (47mm)

Used for autoclaving with the filter in place and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Stainless Steel Support and Ground Joint (90mm)

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Stainless Steel Support and Ground Joint (90mm)

Recommended when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Stainless Steel Support (47mm)

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Stainless Steel Support (47mm)

Designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination.

Thermo Scientific™ Filtration Hardware, Accessories, and Spare Parts

Thermo Scientific™ Filtration Hardware, Accessories, and Spare Parts

Thermo Scientific™ Nalgene™ filtration hardware and accessories can be used in a wide range of applications and in conjunction with our various lines of filtration devices.

DWK Life Sciences Kimble™ Kontes™ Component Parts For 47mm Ultra-Ware™ Microfiltration Assembly

DWK Life Sciences Kimble™ Kontes™ Component Parts For 47mm Ultra-Ware™ Microfiltration Assembly

For ultra-ware microfiltration assembly with stainless steel support

  spinner