missing translation for 'onlineSavingsMsg'
Learn More
Learn More
Labconco Refrigerated CentriVap Benchtop Vacuum Concentrator with glass lid
The Refrigerated CentriVap Centrifugal Concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature.
Brand: Labconco 7310031
66086.79 DKK valid until 2024-12-31
Use promo code "21658" to get your promotional price.
This item is not returnable.
View return policy
Description
The Refrigerated CentriVap Centrifugal Concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature.
- Brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents.
- Lid latch with safety sensor.
- Phenol-free lid gasket.
- Epoxy-coated aluminum chamber.
- 1/4 hp refrigeration system to cool chamber to -4° C.
- 300-watt heater to heat chamber to +100° C.
- Sensor that reads internal chamber temperature.
- Microprocessor-controlled programming for “Temperature 1 ”from -4° C to +100° C, “Temperature 1 ”time from 1 to 999 minutes or indefinite, “Temperature 2 ”from -4° C to +100° C, and “Temperature 2 ”time from 0 to 999 minutes or indefinite. Memory stores 1 to 9 programs.
- LCD for display of program number, set point and actual “Temperature 1 and 2, ”set point and time remaining for “Temperature 1 and 2, ”and refrigeration activation (“Y ”or “N”).
- Control panel with RUN/STOP button, PREHEAT/ COOL button, set point SELECT button, increase/ decrease buttons, and 3 Quick-Start buttons.
- Centrifugal motion is provided by a brushless motor capable of achieving up to 1725 rpm.
- Quick-Stop System to stop vacuum pump, open valve to bleed air into the chamber and stop the rotor within seconds after time expires or RUN/STOP button is pressed.
- Automatic vacuum release valve.
- Built-in vacuum delay allows rotor to achieve speed before applying vacuum.
- Audible alarm to signal completion of set point run time.
- 1/2 ”OD aluminum hose fitting for connection to vacuum tubing. Vacuum pump is not included.
- Vacuum port with quick disconnect fitting for 1/4 ”ID tubing.
- 115 volt models have a 115 volt electrical receptacle on the back to connect accessory vacuum pump to the system.
- 230 volt models have a reverse IEC electrical receptacle on the back to connect accessory vacuum pump to the system.
- 115 volt models have a 10-foot, 3-wire cord with NEMA 5-20 plug.
- 230 volt models have an 8-foot cord with NEMA 6-20 plug.
- Overall dimensions with closed lid: 14.7 ”wide x 21.7 ”deep x 16.6 ”high (37.3 x 55.1 x 42.2 cm).
- Actual weight 95 lbs. (43 kg). Shipping weight 108 lbs. (49 kg).
Specifications
Epoxy-coated Aluminum | |
14.3W x 21.7D x 16.6H in. | |
49.0 kg |
-4°C to +100°C | |
108.0 lb. |