missing translation for 'onlineSavingsMsg'
Få mere at vide
  1. Home
  2. Products
  3. Laboratorieventilation
  4. Stinkskabe
  5. Stinkskabe til generelle formål
  6. Labconco™ Protector™ XStream™ High Performance By-Pass Hoods: 6ft. Width, 230V

Labconco™ Protector™ XStream™ High Performance By-Pass Hoods: 6ft. Width, 230V

Artikelnummer. 13156754 Shop alle Labconco Corporation produkter
Skift visning
Klik for at se tilgængelige muligheder
Inkluderer:
Servicearmaturer: 2
1 product options available for selection
Product selection table with 1 available options. Use arrow keys to navigate and Enter or Space to select.
Artikelnummer. Inkluderer
13156754 Servicearmaturer: 2
Use arrow keys to navigate between rows. Press Enter or Space to select a product option. 1 options available.
1 options
Denne vare kan ikke returneres. Se returpolicy
Artikelnummer. 13156754 Leverandør Labconco™ Leverandørnr. 110610021

Please to purchase this item. Need a web account? Register with us today!

This item is currently unavailable or has been discontinued.
View the product page for possible alternatives.
 Se alternative produkter

Denne vare kan ikke returneres. Se returpolicy

Beskrivelse

Kræver

  • Remote Blower
  • Ductwork
  • Work Surface
  • Base Cabinet or Stand

Offering unsurpassed containment of chemical fumes and vapors while conserving energy when operated at velocities as low as 60 fpm

Design negates the effects of air turbulence, vortexing, and interior air 'roll'.

  • Largest unobstructed sight line available — 37.5 in. from work surface to header panel — provides maximum visibility and user comfort
  • Ergonomic Eco-Foil air foil that reduces energy consumption from 7-10%
  • Clean-Sweep Sash Handle slots bleed air into the hood chamber and directs fume concentrations away from breathing zone
  • Opti-Zone Baffle decreases typical face velocity variations found with other baffles
  • Dry powder-coated steel exterior
  • Upper Dilution Air Supply bathes the sash interior with room air to eliminate chemical fumes along the sash plane near breathing zone
  • Pre-set rear downflow dual baffle
  • Pre-wired T8 fluorescent lighting
  • Sash stop located at 18 in. sash opening position
  • Pre-drilled holes for venting and plumbing passthroughs are provided
  • LED lighting
  • Sash stop located at 18 in. sash opening position
  • 12.81 in. ID exhaust connection(s)
  • Corresponding SpillStopper™ (sold separately) are molded from a special formulation of corrosion-resistant epoxy resin and are dished and contoured to conform to the interior liner of hood
  • Front edge has a large radius to aerodynamically direct airflow into the fume hood
  • Pre-drilled holes for venting and plumbing passthroughs are provided

Certificeringer

CE listed

Tekniske data

Produkttype Laboratory Fume Hood
Belægning Pulver
Belysningstype LED
Materiale Pulverlakeret stål
Strømstyrke 5 A
Certificeringer/compliance ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CE, NFPA 45, SEFA 1, UL
Farve Glacier White
Dybde (engelsk) 37.7 in.
Dybde (metrisk) 95.8 cm
Dimensioner (L x B x H) 72 x 37.7 x 59 in.
Flowhastighed 720 cfm
Højde (engelsk) 59 in.
Højde (engelsk) Rammeåbning 18 in.
Højde (metrisk) 149.9 cm
Inkluderer Servicearmaturer: 2
Spænding 208/230 V
Vægt (engelsk) 600 lb.
Vægt (metrisk) 272 kg
Bredde (engelsk) 72 tommer.
Bredde (metrisk) 182.9 cm
Vis mere Vis mindre
Produkttitel
Vælg et problem

Ved at klikke på Send, anerkender du, at du kan blive kontaktet af Fisher Scientific med hensyn til den feedback, du har givet i denne formular. Vi deler ikke dine oplysninger til andre formål. Alle angivne kontaktoplysninger skal også vedligeholdes i overensstemmelse med vores Privatlivspolitik.